P-LM planetary servo gearmotor encoderless

Precision planetary gear P with LM servo motor without encoder in a compact design without adapter and coupling. Planetary servo reducers in the power range 0.71 – 8.0 kW. Gear ratios 3:1 – 70:1. Maximum torques 13 – 1,840 Nm. Backlash 1 – 5 arcmin. Efficiency 95 – 97 %. Positioning accuracy ±1°. Supplied with servo drive SB6, SC6, SI6. Smaller, lighter, energy-efficient. Wide range of speed regulation without a fan with constant nominal torque. Only a single power cable!

P-LM planetary servo geared motor without encoder

Properties of P-LM planetary servo geared motor

• Compact and very dynamic thanks to direct mounting of the gearbox on the servo motor without adapter and coupling.
• Gearbox mounting via square flange.
• Precise – standard or reduced backlash.
• No positioning errors – gearbox ratio in fractional form.
• Maintenance-free – no oil changes or maintenance required.
• Quiet operation – helical gear wheels.
• Any mounting position.
• High torsional stiffness.
• Low moments of inertia.
• Continuous operation without cooling.
• Seals FKM on input / NBR on output (optionally FKM VITON).
• Rigid output bearing due to preload.
• Ambient temperature from 0° C to 40° C (other temperature ranges on request).
• Maximum gearbox housing temperature ≤ 90 °C.
• Protection class IP65.
• Synthetic gearbox oil type CLP HC ISO VG 150.
• Single primer coat in color RAL7001 or RAL900

Optional versions of P-LM planetary servo geared motor

• Protection class IP66.
• Radial shaft seal FKM VITON.
• Double sealing.
• Reduced backlash 1.5 – 4.0 arcmin.
• BR – spring-applied safety brake.
• With two safety brakes in the P-MB gearbox adapter and on the servo motor.
• Reinforced radial or axial output shaft bearing.
• With modular gear and helical rack.
• Non-toxic oil Mobil CIBUS 150/220 for the food industry, for food machinery, NSF H1 approved.
• Two or more paint layers in any RAL color.
• Special oils for the food industry on customer request.

Different output shaft types of P-LM planetary servo geared motor

• G – solid smooth shaft, P – solid shaft with key.

Properties of LM servo motors without encoder:

• Ideal replacement for an asynchronous motor
  
• Higher energy efficiency compared to comparable asynchronous motors IE4
  
• Energy efficiency IE5 according to IEC/TS 60034-30-2
  
• Significantly lighter and more compact than comparable asynchronous motors
  
• Greater acceleration capability than asynchronous motors
  
• More compact.
  
• Robust due to the elimination of the encoder.
  
• Resistant to vibrations and shocks.
  
• Cheaper alternative to servo motors.
  
• Much more durable, as there is no electronics in the motor.
  
• Full control of speed and torque at low speeds and standstill.
  
• Only standard power cable without additional encoder wires or shielding.
  
• Wiring is limited to the power supply connection cable
  
• Power connector rotatable in any direction with quick coupling
  
• No cooling required at low speeds.
  
• Speed deviations less than 1%
  
• Compatible with motor controller – servo drives SB6, SC6, SI6.
• Positioning accuracy +/-1° on the servo motor shaft without encoder
  
• Protection class IP56, optionally IP66
  
• Ambient temperature from -15 to +40°C
  
• Thermal motor protection – integrated PTC thermistor
  
• Rolling bearings with permanent lubrication and non-contact sealing
  
• Radial shaft seals made of FKM
  
• Product complies with EU (CE), UK (UKCA), and cURus directives